RESOLVER, 3/4" SHAFT

The ISB Resolver is a rotary sensor that decodes the absolute
position of a machine crankshaft. The ISB Resolver has been designed to withstand the harsh environment found on metal
stamping and fabricating machinery. ISB’s design incorporates a solid through shaft design that is supported with bearings at the front and back of the resolver.

Features

Rugged NEMA 13 housing
Brushless size 25
3/4″ diameter shaft, heavy duty
Noise immune ratio-metric converter
Shock vibration resistant
Absolute position sensing
Cable up to 2500 ft with MS connector
Short and open circuit protection

Best suited for applications where a sprocket & chain drive is used or for a direct attachment to the end of a crankshaft using a coupler.

A Resolver can be mounted using the above resolver mounting bracket and installed on a spring loaded base.
This is suggested when a large diameter sprocket and heavy chain is used to drive the resolver.

Connector and Cable

The resolver utilizes a military connector and cable assembly in a variety of lengths listed below.

RESOLVER, 3/8" SHAFT

The ISB Resolver is a rotary sensor that decodes the absolute
position of a machine crankshaft. The ISB Resolver has been designed to
withstand the harsh environment found on metal
stamping and fabricating machinery. ISB’s design incorporates a solid
through shaft design that is supported with bearings at the front and
back of the resolver.

Features

Rugged NEMA 13 housing
Brushless size 25
3/8″ diameter shaft, heavy duty
Noise immune ratio-metric converter
Shock vibration resistant
Absolute position sensing
Cable up to 2500 ft with MS connector
Short and open circuit protection


Best suited for applications where coupled directly to an existing rotary cam box, where a pillow block arrangement, or driven by a rubber-timing belt & pulley exists.

A Resolver can be mounted using the above resolver mounting bracket and installed on a spring loaded base.
This is suggested when a large diameter sprocket and heavy chain is used to drive the resolver.
Connector and Cable

The resolver utilizes a military connector and cable assembly in a variety of lengths listed below.

RESOLVER CABLE
Cable, for ISB resolvers, 20′ MS, 30′ MS, 50′ MS, 100′ MS
 

Proximity switch for RBPC

Proximity switch, PNP
Connector M12, with 4-wire cable

 

RESOLVER SPRING BRACKET

Spring Loaded Base,
Resolver Mounting Bracket Accessory,
Prolongs life and prevents damage to the resolver rotary shaft and bearings.