Merlin Press Brake Guarding

Where To Buy

MERLIN 4000 - PRESS BRAKE GUARDING SYSTEM

The Merlin 4000 design utilizes a rugged 7 inch touch screen based HMI Controller with step-by-step operator prompting messages in English, Spanish and French for easier use. Each controller allows for nearly unlimited job storage as well as back-up and restore capability using a USB Memory Stick, making this today’s most advanced press brake guarding package.

This new system is designed to easily upgrade our older Merlin installations produced over the past 25 years with minimum effort and easily retrofits on new installations of all types of press brakes.

• New compact touch screen based HMI panel for easier use.

• Unlimited job storage with job sharing.

• Each job can have up to 99 steps.

• Easy jobs back-up & restore using a USB memory stick.
• USB & Ethernet networking capability.
• Select-stop programmable stroke stop for each step to allow efficient bending of small or narrow parts. *optional items may be required.
• Password protected set-up and supervisor levels.
• Operates exclusively with ISB’s MX light curtain columns, either 14 mm or 22 mm detection capability, and a maximum of 10 meters of coverage.
• Built-in light curtain muting using two external inputs.

Press brakes are difficult machines to guard, simply because the part’s flange profiles generally changes from step to step during the fabrication process. A standard safety light curtain can not provide protection because of these varying part profiles. Only the unique MERLIN concept, pioneered by ISB, can learn each flange profile while making your initial sample part and automatically create a window exactly the proper size required for each specific cycle. This opening may change from stroke to stroke automatically, completely determined by our processor, not your operator or set up personnel.

The Merlin 4000 HMI works in conjunction with our Merlin MX column’s, Junction block, and the Merlin MX Interface box.

• Easy teaching of the part flanges and support arms by simply following the HMI’s step by step instructions and pressing the provided remote learn foot switch as initial sample part is being fabricated.
• Part flanges are dynamically monitored to prevent teaching of fake parts / operator abuse / permanent blockages.
• Stationary support arm size limits to prevent abuse. (adjustable & password protected)
• Floating beam to allow flat sheets of metal without flanges to pass through the light curtain.
• Blanking tollerance to allow for slight misposition for taught flanges.
• On screen diagnostics / troubleshooting.

• Each beam of the light curtain uses an indicator LED to display a blockage, and a blinking LED to show the size and location of the taught flange

during each step.
• Bumping mode is included to allow for bending of the cones, cylinders or other one of a kind off shaped parts.
• No significant addition to set-up time
• No altering of rapid advance or slow speed of press brake.
• Can be used on any type of press brake. (mechanical, hydraulic, servo-brakes, up-acting or down acting)
• Available in English, Spanish and French.

Accessories

Safety Light Curtains

MX light Curtain Interface Box

Merlin 4000 Interface PCB

Connector cables for MX4100/MX4200 light curtains

Remote learn foot switch

Ordering Information

ISB part #	Description
MXC4000-01 Copy to clipboard	Merlin 4000 HMI
ISB4-RLFS-18 Copy to clipboard	Remote learn foot switch, with 18' cable
MXW4000-01 Copy to clipboard	Merlin 4000 wiring box 120 / 240VAC Input. Includes: Internal power supply, 1 safety relay for 1 set of MX4000 light curtains.
MXW4000-11 Copy to clipboard	Merlin 4000 wiring box 24 VDC Input. Includes: Internal power supply, 1 safety relay for 1 set of MX4000 light curtains.
MXW4000-02 Copy to clipboard	Merlin 4000 wiring box 120 / 240VAC Input. Includes: Internal power supply, 2 safety relays for 2 sets of MX4000 light curtains (front and rear protection).
MXW4000-12 Copy to clipboard	Merlin 4000 wiring box 24 VDC Input. Includes: Internal power supply, 2 safety relays for 2 sets of MX4000 light curtains (front and rear protection).
MXW4000-03 Copy to clipboard	Merlin 4000 wiring box 120 / 240VAC Input. Includes: Internal power supply, 1 safety relays for 1 set of MX4000 light curtains and 1 Safety Mat (FAB-MAT) controller (front and rear protection).
MXP4000-01 Copy to clipboard	Merlin 4000 interface PCB, supporting 1xMX4200 system, Merlin4000 HMI and press brake interface inputs. Includes DIN rail mounting hardware.
MXP4000-02 Copy to clipboard	Merlin 4000 interface PCB, supporting 1xMX4200 system, Merlin4000 HMI and press brake interface inputs plus additional 1xMX4100 system. Includes DIN rail mounting hardware.

Brochures

Merlin 4000 brochure

* You have to Login or Register to see this documents

Installation Manuals

Merlin 4000 installation manual

* You have to Login or Register to see this documents

Wiring Diagram

Merlin 4000 wiring diagram

Merlin 4000 Interface PCB wiring diagram

* You have to Login or Register to see this documents

Manuals

Merlin 4000 user manual

* You have to Login or Register to see this documents

3D Models

Merlin 4000 HMI

* You have to Login or Register to see this documents

Certification

UL Certificate

Merlin4000 HMI EU declaration of conformity

* You have to Login or Register to see this documents